

Marking Black ABS with Fiber Laser to get a White Logo
Our new product is a 10 inch tablet mount for photographers and videographers. We used the Fiber Laser to mark a bright white logo, product name, website, and instructions on the flat surface. The material is most likely ABS, but it's possible that it's nylon. It's difficult to tell, but both materials engrave with about the same settings. The Quarter Twenty Mount is available for purchase here: http://www.thatthingyoulove.com/products/quarter-twenty-ten-inch-tablet-mount


Engraving Marble Trophy with CO2 laser
For an upcoming capoeira event, we upcycled some old trophies by removing the name plates, and engraving directly into the marble (or granite?). Multiple passes were used at high power with the CO2 laser to get a nice, deep etch.


Laser Engraving Maple Whiskey Bottle Stoppers
Jason Prigmore Woodworks http://www.jasonprigmore.com/ approached us about laser engraving hundreds of custom, hand made bottle stoppers. First we made some samples for them to show to the customer. We went through several revisions of the design before the customer was ready to do the large run. The laser engraving topped off the amazing hand crafting that Jason did. A lot of work went into each and everyone of these stoppers. We also engraved his company name on the undersi


Laser Cut Wood Knife Handles with CO2 laser
These knife handle blanks were cut from 1/8 inch thick exotic hardwoods with the C02 laser for a woodworking customer in the Atlanta, GA area.


Bronze Gong laser engraved with CodeGuard Logo
Code Guard asked us if we could engrave their logo in some desktop gongs. We used the fiber laser to engrave the bronze. The results were awesome.


Tormach PCNC 1100 Power Draw Bar DIY Build
Tormach offers a power drawbar option for $1200. After already spending a chunk of change on the machine and other accessories, I found it hard to stomach to pay another $1200 for what amounted to be an air cylinder, air valve, and some machined steel plates and hardware. Also, I design machinery with pneumatic automation and have cylinders, valves, etc. lying around just waiting to be used for a project like this. Tormach uses a 3 stage air cylinder with a bore diameter of 1


Fiber Laser engraved brass dobrao for Capoeira Maculele group
We used the Fiber metal laser engraver to engrave the logo of our capoeria group, Maculele, and the members names on the back side. The metal was brass, cut and machined by Magrao.


Fiber Laser engraved stainless metal leatherman multitool in Atlanta
A local Atlanta company need several hundred Leatherman Wingman multitools engraved with their company logo for awards for the their workers. We had no problem engraving these with the Fiber laser, and turned them around very quickly for them.


Laser Cutting Paper Puppets from Butter Board
A local Atlanta animation artist needed a bunch of puppets cut out to create animated videos for kids. She was previously tediously cutting them out by hand. Cutting them with the laser cutter was a lot more precise, efficient, and very cost effective, considering how much time she saved.


DSLR CAT - Peter Haas shows off his custom CAT Rig
Peter Haas (films.peterjhaas.com) from NYC ordered a customized DSLR CAT Rig several months ago, and sent us these images and his positive feedback after using it on a long documentary shoot. Here's what he had to say: "I have to say, this is by far the most comfortable rig I've used - the weighting was spot on, and there where many times where it one could easily forget it was a DSLR rig and not an Aaton. At the price point that you're offering this thing, I think you could

















