ENGINEERABLE

Lucid Scientific came to us needing several pieces of scientific equipment engraved with their name and serial numbers. These aluminum boxes engraved beautifully using the Fiber laser. Not only did it engrave through the black paint, but it's also permanently etched into the aluminum. The resulting etching was very nice.

Evereman artist stopped by the shop to laser cut some Evereman stencils from 1/8in Baltic Birch. H will be using these to make the rewards for the recent Kickstarter "Evereman Road Show". We used the CO2 laser to cut the stencils. Living in Atlanta, Evereman has been a staple of the local art scene, and it was great to meet the creator. The equipment in my shop gave him lots of other ideas. We cut some 2" pieces of stainless, and used the Fiber laser to etch Evereman on them.

These are some brushed stainless bracelets on which we laser etched a detailed logo onto a slightly curved surface. The fiber laser did a great job with all the detail, and the customer was very happy with the engraving.

Our new product is a 10 inch tablet mount for photographers and videographers. We used the Fiber Laser to mark a bright white logo, product name, website, and instructions on the flat surface. The material is most likely ABS, but it's possible that it's nylon. It's difficult to tell, but both materials engrave with about the same settings. The Quarter Twenty Mount is available for purchase here: http://www.thatthingyoulove.com/products/quarter-twenty-ten-inch-tablet-mount

For an upcoming capoeira event, we upcycled some old trophies by removing the name plates, and engraving directly into the marble (or granite?). Multiple passes were used at high power with the CO2 laser to get a nice, deep etch.

Jason Prigmore Woodworks http://www.jasonprigmore.com/ approached us about laser engraving hundreds of custom, hand made bottle stoppers. First we made some samples for them to show to the customer. We went through several revisions of the design before the customer was ready to do the large run. The laser engraving topped off the amazing hand crafting that Jason did. A lot of work went into each and everyone of these stoppers. We also engraved his company name on the undersi

These knife handle blanks were cut from 1/8 inch thick exotic hardwoods with the C02 laser for a woodworking customer in the Atlanta, GA area.

Code Guard asked us if we could engrave their logo in some desktop gongs. We used the fiber laser to engrave the bronze. The results were awesome.

Tormach offers a power drawbar option for $1200. After already spending a chunk of change on the machine and other accessories, I found it hard to stomach to pay another $1200 for what amounted to be an air cylinder, air valve, and some machined steel plates and hardware. Also, I design machinery with pneumatic automation and have cylinders, valves, etc. lying around just waiting to be used for a project like this. Tormach uses a 3 stage air cylinder with a bore diameter of 1

We used the Fiber metal laser engraver to engrave the logo of our capoeria group, Maculele, and the members names on the back side. The metal was brass, cut and machined by Magrao.