ENGINEERABLE

The Pebble Time Round works perfectly on the TimeDock charging station. Unlike other docks that only work with the Pebble Time, and Time Steel, the TimeDock works will all current versions of the Pebble Time smartwatch family, including the Time Round, or PTR. TimeDock is a perfect fit for the Pebble Time Round. It holds the PTR in an easy to view position. Since the Pebble Time Round has a much shorter battery life than other larger Pebble Times, it will need to be charged

Review of the Champagne Gold TimeDock. A gold Pebble Steel is being charged on the dock.

Jordan Keyes published this video review of the TimeDock for Pebble Time. TimeDock is the only Pebble Time charging dock with integrated charger that places the watch at the perfect viewing angle, making it usable during charging.

TIMEDOCK SMARTSTRAP HACKING WARNING! The following information is purely for educational purposes. TimeDock is sold as a charging dock only, with no implied secondary functions. Opening the charging module of the TimeDock will void any warranty, and we are not responsible for any damage caused to the charging module, or any other devices, including but not limited to the Pebble Time and your computer. Proceed at your own risk. HAPPY EASTER EGG! There’s an Easter egg inside

James Han shows off his TimeDock charging the Pebble Time Steel.

The laser engraving turned out looking awesome!!! They are serialized, and this is the first one to be engraved and completed. We actually don’t know who is getting #1, because they got mixed up before shipping labels were applied. We considered serializing to match the backer #, but the logistics of that due to different colors and other factors would have made that a nightmare. MAIN ASSEMBLY STATION The picture below shows the main assembly station. This is where all the p

These deep engravings in aluminum were achieved by using multiple passes with the Fiber Laser engraver. The graphics etched into the 3 inch aluminum are for a metal cube series by the artist Evereman Evereman http://evereman.com/ #laser

Laser Cutting thin leather with the Epilog Zing 30W CO2 Laser Cutter. Settings are 100% Speed, ??% Power, ???Hz Frequency. These are for a customer in Marietta, Atlanta, GA.

Laser Cutting 2 layers of 1/16 inch thick Felt Fabric with the Epilog Zing 30W CO2 Laser Cutter. Settings are 100% Speed, 23% Power, 200Hz Frequency. These are pieces that will be sewn onto felt pillows by www.sushistyle.com from Atlanta, GA Laser Cutting 2 layers of Fleece Fabric using a 30W Epilog Zing CO2 laser. Settings are 100% Speed, 30% power, and 200Hz frequency. These are some of the pillows that she made previously from felt that we laser cut. Buy the pillows at

HotHead Studios in Decatur, GA wanted 100 custom cutting boards as Christmas gifts to send out to clients. We connected them with the furniture makers at www.theinnovativewood.com, who cut out the cutting boards from maple. They did a great job. Once cut they brought the cutting boards to us, and we engraved them with the CO2 laser.