ENGINEERABLE

In the previous update, I showed the bodies and tips after machining. Later I received pictures of the clips and bolts. All these pics are from post-machining, but before the final surface finish. Here are the clips: MARKSMITH Clips (This looks a bit haphazard, but any scratches are removed in the final finishing process.) Here are the bolt slides: MARKSMITH Bolt Slides post machining I've been told that the first production batch is finished. The packaging (gift box) has bee

The machine shop has finished machining the MARKSMITH parts for the first production batch, and they have sent some pictures. This is the raw machined parts, and the next step is to apply the surface finish. Only the bodies are shown in the following images since the surface finish has to be applied before the final assembly. I'm very excited to see this progress and look forward to receiving them. It's taken longer than anticipated, but you're going to appreciate the detail

I received a lot of questions as to whether the MARKSMITH FINE would be compatible with highlighter cartridges. Watch the video below to see the results. I'll be doing a GIVEAWAY for a MARKSMITH production sample with a set of 5 highlighter cartridges (to be shipped with your Marksmith). All you have to do is LEAVE A COMMENT ON YOUTUBE VIDEO (About whether you would like to see the highlighters available as an add on (or don't care), and if you prefer a specific color, or wan