ENGINEERABLE

DISCLAIMER The following info are changes that were made to our equipment and for our reference only. Do not attempt to make any changes to your equipment. Only certified technicians with the proper skills are permitted to make changes to equipment. Open TM-1 machines had spindle speed limited to 4000 RPM and rapids limited to 200 ipm for safety reasons. An enclosed TM-1 has a 6000rpm spindle and 400 ipm rapids. We're going to enclose our TM-1 milling machine, so we can incre

MAINTENANCE Download the PDF Manual Variable Speed Belt Drive The variable speed belt replacement # is 1922V443 and can be purchased here...

THE FRAME The proliferation of inexpensive laser cutter engravers has dropped the cost of simple CNC machines that can support the load of a torch head. Normally CNC plasma cutter frames are built strong, often as strong as a CNC router. For non-industrial use, the frame doesn't need to be nearly as strong, so these basic laser engravers will work. $150 - 350mm x 350mm - https://s.click.aliexpress.com/e/_mP2J8hM DIY CNC Engraver Kits Wood Carving Engraving Cutting Machine Des

The HAAS TM1 (Mine is 2005, but most years will be similar) has a 15A 220V outlet for the coolant pump. FogBuster and SST LUBE CUBE don't...

I've been eyeing the Fogbuster system for years for times/equipment where I can't use flood coolant, but I just can't swallow paying...

I've been working on a vise jaw design that can hold a workpiece of any shape. The jaws are designed to fit ontop of a KURT clone vise....