ENGINEERABLE

The original finish for the Marksmith Ti Permanent Marker was a brushed finish. The markers are spun on a lathe, and an abrasive non-woven mesh pad like Scotch-bright is used to create the brushed finish. This finish looks amazing when new. Unfortunately, although titanium has a great strength-to-weight ratio, it is a relatively soft metal, even in its GR5 alloy form, and therefore it scratches easily. The brushed finish can therefore get scratched in use. It is easily refini

DISCLAIMER The following info are changes that were made to our equipment and for our reference only. Do not attempt to make any changes...

DISCLAIMER: The following info is documentation for scientific research purposes only. Do not attempt to recreate any of the equipment described. We are not responsible for any damage caused by information documented here. Read at your own risk. DESIGNING A LITHIUM ION CHARGING CABINET Lithium Ion battery charging cabinets that can contain a fire and smoke from a battery catching fire are very expensive... for good reason. It's very difficult to contain and prevent the spread

This beach shade design is supported by poles inserted into the ground and therefore does not need a sandbag and cord in front to hold it...

WORK OFFSETS (X and Y) USING THE 3D TASTER PROBE - (HAAS Video Link to 0:27) The 3D taster (Tschorn) probe is calibrated to be centered on the spindle axis when the indicator value reads 0 in X or Y. Use the 3D taster (Tschorn) Probe, touch the part with the probe until the indicator is at 0. This is the edge of the part, no offset calculation is necessary Make sure the correct jog axis is selected that is to be zeroed, and press PART ZERO SET Repeat for the other axis. USING

If you're reading this, then you know that the best feature of Adobe Rush on mobile devices was the convenience of doing quick edits on the go, and then sync with Adobe Premiere over the Adobe Cloud Storage to do more powerful and final editing, but now that Adobe Cloud Storage has been shut down forever the sync feature is broken and Adobe Rush has been left orphaned without any apparent way to move projects to edit them on Adobe Premiere... until now. Let me show you an eas

MAINTENANCE Download the PDF Manual Variable Speed Belt Drive The variable speed belt replacement # is 1922V443 and can be purchased here...

Breaking a tap is incredibly frustrating, especially when the part it's broken in took a lot of time to make or is expensive. The broken...

THE FRAME The proliferation of inexpensive laser cutter engravers has dropped the cost of simple CNC machines that can support the load...

The battery life on our Dyson V7 and Dyson V8 vacuum was decreasing to the point where boost mode did not work for more than a few...