ENGINEERABLE

Now Splatrball has released their own tracer mag called the PYRO Mag, and it works with the SRB1200 as well as the SRB400. At 550 rounds it is a little bit larger than the stock SRB400 magazine (400 rounds) and it is smaller than the stock SRB1200 magazine (1200 rounds). It requires 2 AAA batteries so the power is independent from the blaster, and has an on off switch. I've modded many gel blasters and gel blaster magazines to allow them to illuminate glow-in-the-dark gel bal

This tracer mod for the SPLAT-R-BALL SRB1200 cost nothing to make and needs only a few simple tools for an awesome effect. I use the internal LEDs that come with the Splatrball SRB1200 blaster to light up glow gel balls before they enter the barrel. Very simple to DIY for fun night time play. Watch the video to see how to do the tracer mod: ▼ WHERE TO BUY GEL BLASTERS & AMMO: ▶ Glow In The Dark Gel Balls: (GelStrike is the only brand I have found that works in mag fed blaster

I unbox the Splat-R-Ball SRB1200 gel blaster and give an initial review. This Splatrball comes with a huge 1200-round drum magazine. The SRB1200 is the big brother of the SRB400. Unlike the SRB400 which is a clone of the WELLS G36C gel blaster, the SRB1200 appears to be a unique cosmetic design. It still uses the same V3 style airsoft/gel blaster gearbox as the SRB400, but it lacks the single-shot mode. The SRB1200 can only fire in automatic mode. Read this page with a lot mo

There are 2 versions of the Splat-R-Ball SRB400 gel ball blaster gun. The most common is the orange version. It comes with a stock. The blue version doesn't have the stock, it only comes with a sling that attaches to where the stock normally would. Since both blasters are the same besides the color, the stock and mags are fully interchangeable. I unbox the Blue Splat-R-Ball gel blaster and give an initial review. The Splat-R-Ball gun is a modified WELLS G36c blaster. The exte

Buy Splatrball Drum Mag here https://amzn.to/3P5dPuI and watch this video to increase the capacity from 800 rounds to 1200 rounds. Splat-R-Ball sells a drum mag for the SRB400, but it only holds 800 rounds. The SRB1200 Splat-R-Ball gel blaster has 1200 round magazine that is exactly the same size. what's the difference between them that limits one of them to 800 rounds? There's something inside that is limiting the capacity. Splatrball is trying to pwn us, but we pwned them!

I compare the Splatrball SRB400 and Splatrball SRB1200 gel blasters and discuss the similarities and differences. Which one is better? Watch the video to find out! ▼ WHERE TO BUY - https://www.amazon.com/shop/engineerable ▶ SplatRBall SRB400 Kit (Orange, Shown in this Video): https://amzn.to/3Ig1BuO ▶ SplatRBall SRB400-SUB Kit (Blue, Without stock): https://amzn.to/3wa5G0Y ▶ SplatRBall SRB1200 Kit (I haven't tested this one yet): https://amzn.to/3ibpEAl ▶ SplatRball 20K Orang

This tracer mod for the SPLAT-R-BALL SRB400 Gel Blaster Magazine is super easy. All you need is a 5V UV LED strip , a soldering iron, wire strippers, knife, and tape. Very simple to DIY for fun nighttime play. NEW! UPDATED METHOD To Reduce Light Leakage ▼ WHERE TO BUY PARTS: ▶ USB 5V UV LED Strip - https://amzn.to/3bvng7B ▼ WHERE TO BUY TOOLS: ▶ Wire Strippers and Cutter - https://amzn.to/3SS8lVw ▶ Xacto Knife - https://amzn.to/3SHS2dS ▶ Screwdriver (#0 or #1 Phillips) -...

This tracer mod for the SPLAT-R-BALL SRB1200 Gel Blasters DRUM MAG is super easy and does not require soldering. All you need is a 5V UV LED strip https://amzn.to/3bvng7B, and a euro-style terminal strip block https://amzn.to/39WuMrE. Very simple to DIY for fun nighttime play. Read this page with a lot more maintenance info, mods, and replacement parts: https://www.engineerable.com/single-post/what-s-inside-splat-r-ball-gel-blaster-i-take-apart-gel-ball-blaster-to-see-how-it-

This tracer mod for the SPLAT-R-BALL SRB400 is cheap and easy for awesome glow-in-the-dark fun. ▼ WHERE TO BUY PARTS: ▶ 3mm UV LEDs: https://amzn.to/3uEoT8I ▶ 220 Ohm Resistor: https://amzn.to/3IPAp6l ▶ Wire with JST connectors (I recommend using this instead of plain wires): https://amzn.to/3tUwWPg ▶ Wire: https://amzn.to/3M0kqEW or https://amzn.to/392nsKe ▶ Heat Shrink Tubing: https://amzn.to/3vXD4HP ▶ Black Medium Thick Rubber Toughened Super Glue (To glue nuts to the shel

I unbox the Splat-R-Ball blaster and give an initial review. The Splat-R-Ball blaster is a modified WELLS G36c blaster. The external cosmetics are changed a little, but the gearbox and internals are almost exactly the same. Therefore, replacement parts or upgrades available for the WELLS G36c will also work with the SplatRball blaster. Watch the unboxing and overview video: Check out the new video: What's Inside the Splat-R-Ball blaster. I take it apart to learn how it's made