How To Install A HOP-UP On GEL BLASTER, Which One To Buy, and Where To Buy It From
WHAT IS GEL BLASTER HOP-UP?
A hop-up for gel blasters is a device that is attached onto the end of the barrel and gives the gel ball a backspin as it exits. This backspin makes the ball rise in the air, counteracting the effects from gravity until the velocity of the ball decreases to the point it falls to the ground. When adjusted properly, the hop up will give the gel balls a flat flight instead of traveling in an arc. Also, applying the same spin to each ball will increase the accuracy of the blaster.
WHICH HOP-UP TO BUY
The best hop up will change as new and better ones are introduced. This is a list with the best at the top. All these hop-ups are designed for 9.5mm OD barrels, and most of the cheaper blasters use 9mm barrels, so you'll need to use a shim like I show in the videos to make it work.
Rizer V2 Hop-Up - Watch the video.
Uband hop-up - claims to be rebranded Rizer, but when both are compared side by side, it looks more like a knock off. It still works well.
Aztech Innovations Range Warrior hop-up - easy to adjust but must work best with 250+ FPS blasters, because on a Surge XL, the min adjustment was still too much.
Warinterest sold by Geltactical - Watch the install video
RIZER V2 Hop-Up Review
Aztech Innovations Range Warrior hop-up review
WHERE TO BUY HOP-UP
Zhenduo - Whatch the video.
HOW TO INSTALL HOP-UP VIDEOS
GelTactical's LIGHTNING BLASTER MRT NYLON M4
Watch this video to see how to install A HOP-UP MOD on GelTactical's LIGHTNING BLASTER MRT NYLON M4 Gel Blaster Splatrball Toy
Watch this video to see how to add a HOP UP MOD to Splatrball SRB400 Gel Blaster to improve accuracy | Splat-R-Ball Upgrade
GEL BLASTER SURGE XL
How to add a HOP-UP to make gel blaster SURGE XL more accurate using the Aztech Innovations Range Warrior hop-up